Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Taylor Dixon

Modification approuvée par Taylor Dixon

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] To removeThe clear rubber backing of the home button, you will insert an opening tool into the gap between the button assembly andis lightly adhered to the back of the display. It's important thatThe adhesive should be easy to cut through with an opening tool. If you insert your opening tool as close tohave trouble removing the display as possibleassembly in the following steps, try heating the area using an iOpener or a hair dryer to avoid cutting throughloosen the layers of the home button assemblyadhesive.
[* icon_note] To removeThe clear rubber backing of the home button, you will insert an opening tool into the gap between the button assembly andis lightly adhered to the back of the display. It's important thatThe adhesive should be easy to cut through with an opening tool. If you insert your opening tool as close tohave trouble removing the display as possibleassembly in the following steps, try heating the area using an iOpener or a hair dryer to avoid cutting throughloosen the layers of the home button assemblyadhesive.