Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Arthur Shi

Modification approuvée par Arthur Shi

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Insert the point of a spudger into the marked areas and push until the fingerprint scanner is loosened from its recess.
- [* black] Do not apply pressure directly onto the delicate flex cable.
- [* black] If the fingerprint scanner will not loosen, make sure you are not [https://d3nevzfk7ii3be.cloudfront.net/igi/EwuBU6EFB4BfRBGv.full|pressing against the metal plate|new_window=true].
+[* red] Insert the point of a spudger into the marked areas on either side of the flex cable, and push until the fingerprint scanner is loosened from its recess.
+ [* icon_note] Do not apply pressure directly onto the delicate flex cable.
+ [* black] If the fingerprint scanner will not loosen, make sure you are not pressing the spudger's point against [https://d3nevzfk7ii3be.cloudfront.net/igi/EwuBU6EFB4BfRBGv.full|the metal plate|new_window=true].