Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Taylor Dixon

Modification approuvée par Taylor Dixon

Avant
Après
Inchangé

Lignes de l'étape

[* red] Insert the point of a spudger into the marked areas on either side of the flex cable, and push until the fingerprint scanner is loosened from its recess.
- [* icon_note] Do not apply pressure directly onto the delicate flex cable.
- [* black] If the fingerprint scanner will not loosen, make sure you are not pressing the spudger's point against [https://d3nevzfk7ii3be.cloudfront.net/igi/EwuBU6EFB4BfRBGv.full|the metal plate|new_window=true].
+ [* icon_caution] Do not apply pressure directly onto the delicate flex cable.
+ [* icon_note] If the fingerprint scanner is not coming loose, make sure you are pressing the spudger's point against the backside of the scanner as indicated in the first image, and not [https://d3nevzfk7ii3be.cloudfront.net/igi/EwuBU6EFB4BfRBGv.full|the metal plate|new_window=true] below it.