Modifications apportées à l'étape #2
Lignes de l'étape
| - | [* red] Position the rectangular plate over the four phillips #5 wood screw holes on the left width of the panel and the two remaining wood screw holes on the width's side. |
|---|---|
| + | [* red] Position the rectangular plate over the phillips #5 wood screw holes on the left width. |
| + | [* icon_note] There are a total of six phillips #5 wood screw holes. Four wooden screw holes are on the left width of the panel and two additional screw holes are on the width's side. |
| [* black] Repeat this step with the right width of the panel. | |
| [* icon_note] The rectangular plates that will be fastened to the left and right width are connected to chains. The chains are connected to another hinge piece. It will later be connected to the main desk frame. |