Modifications apportées à l'étape #4
Lignes de l'étape
| [* black] Position the hemispherical plates over the left hemispherical hole on the length of the panel. | |
| [* black] Repeat this step with the right length of the panel. | |
| [* icon_note] A hemisphere is the half of a circle. | |
| - | [* black] Use the phillips #2 screwdriver to turn the #5 wood screws and tighten the hemispherical plates along the length of the drop-front panel. |
| + | [* black] Use the phillips #2 screwdriver to turn the three #5 wood screws and tighten the hemispherical plates along the length of the drop-front panel. |