Modifications apportées à l'étape #8
Modifié par Tyler Turner —
Modification approuvée par Tyler Turner
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Once both of the loops have been tightly screwed in, get an approximation of how much wire you will be using. Put the wire through the loop with about 6" excess. Place the anchors for the wall a few inches above the screws and slightly centered. Pull taught on the wire where the anchors are and put the opposite end of the wire through the loop. |
|---|
Image 1
Aucune image précédente
Ajouté