Historique de l'étape n° 8 de How to Fix a Broken Wooden Frame

Modifications apportées à l'étape #8

Modifié par Tyler Turner — 28 févr. 2019

Modification approuvée par Tyler Turner

-	[* black] 1. Once both of the loops have been tightly screwed in, get an approximation of how much wire you will be using.
-	[* black] 2. Put the wire through the loop with about 6" excess.
-	[* black] 3. Place the anchors for the wall a few inches above the screws and slightly centered.
-	[* black] 4. Pull taught on the wire where the anchors are and put the opposite end of the wire through the loop.
+	[* black] 11. Once both of the loops have been tightly screwed in, get an approximation of how much wire you will be using.
+	[* black] 12. Put the wire through the loop with about 6" excess.
+	[* black] 13. Place the anchors for the wall a few inches above the screws and slightly centered.
+	[* black] 14. Pull taught on the wire where the anchors are and put the opposite end of the wire through the loop.