Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #8

Modifié par Tyler Turner —

Modification approuvée par Tyler Turner

Avant
Après
Inchangé

Lignes de l'étape

-[* black] 11. Once both of the loops have been tightly screwed in, get an approximation of how much wire you will be using.
-[* black] 12. Put the wire through the loop with about 6" excess.
-[* black] 13. Place the anchors for the wall a few inches above the screws and slightly centered.
-[* black] 14. Pull taught on the wire where the anchors are and put the opposite end of the wire through the loop.
+[* black] Once both of the loops have been tightly screwed in, get an approximation of how much wire you will be using.
+[* black] Put the wire through the loop with about 6" excess.
+[* black] Place the anchors for the wall a few inches above the screws and slightly centered.
+[* black] Pull taught on the wire where the anchors are and put the opposite end of the wire through the loop.