Historique de l'étape n° 13 de Xbox 360 Teardown

Modifications apportées à l'étape #13

Modifié par myflickris — 27 juin 2011

	[* black] Removing the top half.
-	[* red] Flip the console over, and remove the 6 T10 Screws. They should each be 3" long, if not, you removed the wrong screws.
-	[* black] ~~Than~~ flip the console back over, holding it by both the plastic and the metal.
+	[* red] Flip the console over and remove the 6 T10 Screws. They should each be 3" long, if not, you removed the wrong screws.
+	[* black] Then flip the console back over, holding it by both the plastic and the metal.