Modifications apportées à l'étape #17
Modifié par Honam1021 —
Modification rejetée par Brett Hartt
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Removing the Fans. | |
| [* black] Remove the 3-Pin power connector from the logic board. This is the same connector used in some PC fans. | |
| + | [* icon_note] Consoles without hdmi output might have a 4-pin connector instead |
| [* black] Using a flathead screwdriver, pry the fans toward you. | |
| [* black] Pull the fans toward you, then lift them out of the casing. |