Modifications apportées à l'étape #20
Modifié par Chris Green —
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Removing the logic board. | |
| [* red] Remove these T10 Screws from the bottem metal casing, there may be more than the number circled, just remove them all. | |
| - | [* yellow] |
| + | [* yellow] If they are present, remove these T8 Screws from the bottem metal casing. |
| [* black] Flip the casing over. | |
| [* black] With a little persuesion, the logic board should lift out of the casing. |