Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par JaosnT

Validation en attente


Lignes de l'étape

+[* black] Remove the single screw on the right side of the LCD Board. (labeled in Yellow, We will remove the rest later in the teardown.
[* black] There are three screws holding the Tray down to the bottom of the unit- Remove them
[* black] Gently remove all connectors (6) in the image highlighted with red boxes
[* black] Turn the unit over. release the two clips on the underside and then the two on either side of the unit in order to Remove the Front Face.

Image 1

Ancienne version

Nouvelle version