Aller au contenu principal

Modifications apportées à l'étape #8

Modifié par JaosnT

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] This is the Processing Board. It is directly connected to the I/O Board and to the Front panel/LCD board. I looked up a couple of the IC's and found that the one on the top right is a MPEG-Chip. Then the Small top left IC is a 32bit microcontroller. I CouldCouldn't find noany more without having to hunt down Datasheets.
[* black] This is the Processing Board. It is directly connected to the I/O Board and to the Front panel/LCD board. I looked up a couple of the IC's and found that the one on the top right is a MPEG-Chip. Then the Small top left IC is a 32bit microcontroller. I CouldCouldn't find noany more without having to hunt down Datasheets.
[* black] Unscrew the four screws (Circled in red) in order to remove the Processing board.
[* black] Then the remaining two from the Front Pane/ LCD Board.
[* black] The Rear panel can be removed if needed i have circled in this last picture as to where they were located.
[* black] And ThatsBesides the case and cd/ tray at the top of the last picture there is the LCD board , the Processing Board, The I/O Board and the Power supply (in Counterclockwise)And that is a completely dis-assembled Sony DVD Player.
[* black] And ThatsBesides the case and cd/ tray at the top of the last picture there is the LCD board , the Processing Board, The I/O Board and the Power supply (in Counterclockwise)And that is a completely dis-assembled Sony DVD Player.