Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Gaetan

Modification approuvée par Gaetan

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* icon_note] At this step, the keyboard is still maintained with double-sided tape between the keyboard underside and the metallic PCB protector.
[* red] Carefully slide a spudger[product|IF145-002|Spudger] between the keyboard underside and the metallic PCB protector near the center/right at the bottom. Use the spudger as a lever to release the keyboard from the metallic PCB protector.
[* red] Carefully slide a spudger[product|IF145-002|Spudger] between the keyboard underside and the metallic PCB protector near the center/right at the bottom. Use the spudger as a lever to release the keyboard from the metallic PCB protector.
[* icon_caution] The keyboard is still connected to the PCB with a ribbon. Handle it carefully.