Modifications apportées à l'étape #4
Modifié par Sant Strassheim —
Modification approuvée par Sant Strassheim
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use the plastic opening tool to free the back casing from the rest of the camera body. Be careful because there is a ribbon cable that attaches the back casing to the motherboard. |
|---|---|
| - | [* black] Gently lift up on the black latch holding the ribbon in place. |
| - | [* black] After, the ribbon cable should just slide out. |
| + | [* black] Use the plastic opening tool to free the back casing from the rest of the camera body. |
| + | [* icon_caution] Be careful because there is a ribbon cable that attaches the back casing to the motherboard. |
| + | [* black] Gently lift up on the black latch holding the ribbon cable in place. |
| + | [* black] Afterward, the ribbon cable should just slide out. |