Modifications apportées à l'étape #1
Modifié par Sant Strassheim —
Modification approuvée par Sant Strassheim
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Locate the pin holding the battery door to the body of the camera on the left side of the battery door. Use a small punch tip and push out the pin that is located there out as far as you can get it on that side. |
|---|---|
| + | [* black] Close the battery door and switch over to the right side of the pin where you just started pushing it out. using precision tweezers, continue to grab the pin and slide it out to the right until there is enough of the right end of the pin to pull all the way out. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté