Modifications apportées à l'étape #3
Modifié par Thomas Griffin —
Modification approuvée par Thomas Griffin
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Use the metal spudger at the bottom-right corner of the palmrest’s faceplate to pry underneath the plastic casing and separate the palmrest from the laptop’s bottom plastic shell. |
|---|---|
| + | [* black] Once the spudger has leverage between the two halves of the case, work the tool around the right, bottom, and left edges of the palmrest, prying the top from the bottom at around every half-inch. |
| + | [* icon_caution] This process will take some physical effort to complete, but be careful not to overexert force upon the spudger, as the plastic will bend or snap if mishandled. |