Aller au contenu principal

Modifications apportées à cette étape

Modifié par Ethan Boone

Modification approuvée par Ethan Boone

Avant
Après
Inchangé

Lignes de l'étape

[* red] Remove two silver #00 Phillips head screws located near the top of the back panel.
[* orange] Remove the two silver #00 Phillips head screws on the top side.
[* yellow] Use the black spudger to unclip the ribbon on the top right corner and remove it.
+[* black] Once the above steps are completed, gently pull the flash assembly from the device.