Aller au contenu principal

Modifications apportées à l'étape #9

Modifié par bac

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* yellow] ... gently flip up the black catch at the edge of the ribbon cable connector (shown inside the yellow square)connector. You can now pull the ribbbon cable out of the connector.
[* yellow] ... gently flip up the black catch at the edge of the ribbon cable connector (shown inside the yellow square)connector. You can now pull the ribbbon cable out of the connector.
[* black] In the 2nd photo, you can see the bottom plate, along with rear button switches, and battery door microswitch.
[* black] Note: there is still a clear plastic insulating sheet attached between this assembly and the camera. It will be detached at a later step.