Aller au contenu principal

Modifications apportées à l'étape #19

Modifié par bac

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Here's the PCB flipped up and away from the camera chassis.
[* icon_caution] Note: there are 2 flex circuit paths connecting the PCBcircuit board to the chassis - they are soldered and can't be detached without re-soldering. Be careful not to bend the flex circuit too severely or it may break. I had to resolder one of the connections after I was done.
[* icon_caution] Note: there are 2 flex circuit paths connecting the PCBcircuit board to the chassis - they are soldered and can't be detached without re-soldering. Be careful not to bend the flex circuit too severely or it may break. I had to resolder one of the connections after I was done.