Aller au contenu principal

Modifications apportées à l'étape #24

Modifié par bac

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* yellow] Back on the top of the camera, gently pull the white connector with red/black wires (marked with the yellow square) out of the socket.
[* yellow] Back on the top of the camera, gently pull the white connector with red/black wires (marked with the yellow square) out of the socket.
[* black] Now gently pull up the flex circuit and the socket away from the camera top
[* black] The 2nd photo shows the flex circuit and socket from the last step lifted away from the camera. This will now allow us to separate the plastic chassis of the camera from the lens module assembly in following steps...