Modifications apportées à l'étape #6
Lignes de l'étape
| + | [title] Insert the battery |
|---|---|
| + | [* black] Place a small piece of plastic from the filter on the negative side of the battery holder. |
| + | [* black] The negative side is marked with (-) and is on the side towards the solar panels. |
| + | [* black] Insert the battery into the battery holder. |
| + | [* black] Secure the battery with a zip tie. |
| + | [* red] The zip tie is inserted from the front and goes around the battery and through the PCB again. |
| + | [* red] The zip tie is then sequred with another zip tie. |
| + | [* black] Cut off the remaining parts of the zip tie. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté