Modifications apportées à l'étape #10
Lignes de l'étape
| + | [title] Attach the CO2 sensor |
|---|---|
| + | [* black] Twist the CO2 sensor one time so the wires are not lose. |
| + | [* red] The blue and green wire should be on the outside of the PCB. |
| + | [* orange] Use a zip tie to secure the CO2 sensor the the top of the PCB. |
| + | [* icon_note] The sensor should not stick out past the PCB. |
Image 1
Aucune image précédente
Ajouté