Modifications apportées à l'étape #1
Lignes de l'étape
| + | [* icon_caution] Caution!!! High DC voltage up to 300V |
|---|---|
| + | [* red] Peel tape with an isolated tool (plastic crowbar, plastic tweezers, toothpick etc). DO NOT USE metal tweezers. |
| + | [* light_blue] Use a 2-10kohm 5W resistor to discharge flash condenser, for atleast 10 seconds. |
| + | [* light_blue] Check voltage across 2 points. Make sure it's below 5V DC |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté