Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Oliver Myers

Modification approuvée par Oliver Myers

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Remove the hose clamps and set them aside for later. Straighten the used line out and place it alongside the new hose, then cut a piece the same length with the hose cutter (a sharp knife will also work fine).
-[* black] Place the hose clamps on the new hose.
+[* black] Remove the hose clamps from the damaged line. Straighten the used line out and place it alongside the new hose, then cut a piece the same length with the hose cutter (a sharp knife will also work fine).
+[* black] Place the hose clamps on the new hose. There is no need to replace the old hose clamps.