Aller au contenu principal

Modifications apportées à cette étape

Modifié par Oliver Myers

Modification approuvée par Oliver Myers

Avant
Après
Inchangé

Lignes de l'étape

[* black] Locate the two bumps on one of the main lines, and the single bump on the other main line.
[* black] Slide the new hose onto the main lines. Ensure the side going on the Pressure Relief line goes at least the width of the hose clamp past the bump.
-[* black] Slide the other end on. ensure the end of the line goes past both bumps, and position the hose clamp to be between the two bumps.