Aller au contenu principal

Modifications apportées à cette étape

Modifié par Oliver Myers

Modification approuvée par Oliver Myers

Avant
Après
Inchangé

Lignes de l'étape

[* black] Locate the two bumps on one of the main lines, and the single bump on the other main line.
-[* black] Slide the new hose onto the main lines. Ensure the side going on the Pressure Relief line goes at least the width of the hose clamp past the bump.
+[* black] Slide the new hose onto the main line at the pressure relief valve. Make sure the hose goes at least the width of the hose clamp past the bump.