Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #6

Modifié par Andre Nguyen —

Modification approuvée par Andre Nguyen

Avant
Après
Inchangé

Lignes de l'étape

[* black] 1) Cut the end of the damaged wire with a pair of snips.
-[* black] CAUTION: Do not cut too far down the wire otherwise you will lose lead wire if you have to start over.
+[* icon_caution] CAUTION: Do not cut too far down the wire otherwise you will lose lead wire if you have to start over.
[* black] 2) Use a pair of wire strippers to remove 1/2 to 3/4 of an inch of the wire casing.
[* black] 3) Complete this step until all damaged wires are repaired.