Modifications apportées à l'étape #6
Modifié par Andre Nguyen —
Modification approuvée par Andre Nguyen
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Cut the end of the damaged wire with a pair of snips. | |
| [* icon_caution] CAUTION: Do not cut too far down the wire otherwise you will lose lead wire if you have to start over. | |
| - | [* black] Use a pair of wire strippers to remove |
| + | [* black] Use a pair of wire strippers to remove 2 cm of the wire casing. |
| [* black] Complete this step until all damaged wires are repaired. |