Modifications apportées à l'étape #7
Modifié par Andre Nguyen —
Modification approuvée par Andre Nguyen
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] 1) Connect the lighting, motor, and AC in wires to the replacement remote receiver. | |
| [* black] 2) Gently tug each wire connection and make sure it's properly terminated with the twist on connectors. | |
| [* black] 3) Cut a 5-6 inch piece of electrical tape and wrap around the end of each wire. | |
| - | [* |
| + | [* icon_note] TIP: Attach electrical tape at the base of the wires first, then finish wrapping tape around the twist connector. |