Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #8

Modifié par rwong05

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Pull up onyellow] The right side of bottom case should separate from the screen casing to separatetop case when you remove the sliding shaft hingeshaft.
[* black] Pull up onyellow] The right side of bottom case should separate from the screen casing to separatetop case when you remove the sliding shaft hingeshaft.
[* icon_caution] Do not pull up too far or the wire hinge may be damaged.
[* red] PullSlide the screen casingtop case to the right and up to separate the wire hinge and release the joint.
[* black] Weave the wires and ribbons through the wire hinge to completely separate the screentop and bottom casings.
[* red] PullSlide the screen casingtop case to the right and up to separate the wire hinge and release the joint.
[* black] Weave the wires and ribbons through the wire hinge to completely separate the screentop and bottom casings.

Image 1

Ancienne version

Nouvelle version