Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Journey McDowell

Modification approuvée par Journey McDowell

Avant
Après
Inchangé

Lignes de l'étape

[title] Charge to 12V Using 2A Until the Amperage Decreases to 100mA
-[* black] With the Power Supply disconnected from the battery pack main leads, set the voltage to 12V and a maximum of 2A. You can ensure this is set correctly if you touch the Power Supply leads together. It should go into Constant Current mode where the maximum amperage is set and the voltage will drop.
[* black] I chose 12V here because my pack read 6.85V. Ensure to set a Power Supply voltage higher than your battery pack, otherwise sparks will fly due to the battery pack filling the capacitor of the Power Supply.
[* black] Connect the Negative Terminal