Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Miroslav Djuric

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Use a screwdriver to remove the 5 screws on the stylus holder.
[* orange] Removing 2/5 screws on the stylus also removesAlso disconnect and remove the "R" trigger.
[*
trigger button, which is held in place by two of the five stylus holder screws.
[*
icon_caution] Caution: The "R" trigger has a spring behind its center and a small metal axle in its joint.
[* orange] Removing 2/5 screws on the stylus also removesAlso disconnect and remove the "R" trigger.
[*
trigger button, which is held in place by two of the five stylus holder screws.
[*
icon_caution] Caution: The "R" trigger has a spring behind its center and a small metal axle in its joint.