Modifications apportées à l'étape #3
Modifié par Daniel Ulyanchuk —
Modification approuvée par Daniel Ulyanchuk
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Next, we remove the rear celling clips. |
|---|---|
| + | [* black] For this, you will need an Allen wrench, and a flathead screwdriver. Insert the flathead into the top of the crevice. Gently pry back and forth until it springs open, revealing the screw inside holding the clip in place. Use the Allen wrench in a counterclockwise direction to remove the screw and pull on the clip to take it off. |
| + | [* black] Repeat on other side of the cab. |
Image 1
Aucune image précédente
Ajouté