Modifications apportées à l'étape #5
Modifié par Daniel Ulyanchuk —
Modification approuvée par Daniel Ulyanchuk
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Next, we remove the two rear tabs. These are fairly simple, but often tedious because of design. |
|---|---|
| + | [* black] The tab is 2 inches long, with the first inch a straight shaft, and the last inch a bristled point that holds the tab in place. The only way to remove them is to use a screwdriver or two to get underneath them and pry them up as much as possible. |
| + | [* black] Next, grab the tab firmly and pull it out in one continuous motion, moving it side to side or rotating it as needed. |
| + | [* black] Repeat process on the second tab. |
Image 1
Aucune image précédente
Ajouté