Modifications apportées à l'étape #5
Modifié par Austin Blakely —
Modification approuvée par Austin Blakely
- Avant
- Après
- Inchangé
Lignes de l'étape
- | [* black] Next, we remove the two rear tabs. These are fairly simple, but often tedious because of design. |
---|---|
- | [* black] The tab is 2 inches long, with the first inch a straight shaft, and the last inch a bristled point that holds the tab in place. The only way to remove them is to use a screwdriver or two to get underneath them and pry them up as much as possible. |
- | [* black] Next, grab the tab firmly and pull it out in one continuous motion, moving it side to side or rotating it as needed. |
+ | [* icon_note] Next, we remove the two rear tabs. These are fairly simple, but often tedious because of design. |
+ | [* icon_note] The tab is 2 inches long, with the first inch a straight shaft, and the last inch a bristled point that holds the tab in place. |
+ | [* black] Use a screwdriver or two to get underneath the clips and pry them up as much as possible. |
+ | [* black] Grab the tab firmly and pull it out in one continuous motion, moving it side to side or rotating it as needed. |
[* black] Repeat process on the second tab. |