Modifications apportées à l'étape #6
Modifié par Daniel Ulyanchuk —
Modification approuvée par Daniel Ulyanchuk
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Next, we remove the center console light. This light has 4 clips holding it up, 2 bigger main ones on each side of the light, and 2 smaller ones on the far end of the console. |
|---|---|
| + | [* black] Choose a side that you will focus on. Line up your flathead with the side of the light that you chose and gently pry it up with increasing pressure until one of the 2 main clips disengages. This clip is extremely strong, but the console is much stronger, so do not worry about breaking anything. |
| + | [* black] After the console pops out, disconnect the wiring from this light as well. Outlined in step 5. |
Image 1
Aucune image précédente
Ajouté