Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Gaetan

Modification approuvée par Gaetan

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Use a tweezer to slightly bent the logic board contacts on the USB connector. The purpose is to ensure a good contact when the USB connector will be applied against the logic board.
[* red] In the first picture, you can see the contacts in the original position.
[* green] In the third picture, you can see the contacts in the bent position.
[* icon_caution] Be careful, the contactors are fragile. Just slightly bent them.