Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Gaetan

Modification approuvée par Gaetan

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* blackicon_note] ''It is important to have the 2 following steps completed in a short time to guaranty a good quality gluing if you use an instant glue.''
[* red
] Apply some glue on the logic board and below the USB connector.
[* black

[* icon_caution
] Do not apply glue on the rear partpart on the logic board and on the USB connector. It is important to ensure a good electrical contact between the connector and the logic board.
[* black] Place the USB connector at is original place. Use a magnifying glass to ensure all five contacts are well in place against the logic board contacts. You can use a tweezer to help
.
[* blackicon_note] ''It is important to have the 2 following steps completed in a short time to guaranty a good quality gluing if you use an instant glue.''
[* red
] Apply some glue on the logic board and below the USB connector.
[* black

[* icon_caution
] Do not apply glue on the rear partpart on the logic board and on the USB connector. It is important to ensure a good electrical contact between the connector and the logic board.
[* black] Place the USB connector at is original place. Use a magnifying glass to ensure all five contacts are well in place against the logic board contacts. You can use a tweezer to help
.

Image 2

Ancienne version

Nouvelle version