Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Gaetan

Modification approuvée par Gaetan

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* icon_note] Be careful, this temporary repair is very fragile. Do not apply any tension on the USB connector or with the USB cable.
[* icon_caution] Before to continue, you should ensure one more time that the connectors are well in place to prevent from any short circuit. I recommend to:
[*
black] Insert wisdom hereFirst, plug and apply the electrical power on the logic board only do not plug the hard drive or even the USB connector. Wait for a minute if everything goes well!
[* black] You should use a hold computer if any available to you. Your computer should be protected from a short circuit here but we never know. Please don't use your brand new computer!
[* black] When you are ready to go:
[* black] Plug the hard drive with the USB/SATA bridge throug the SATA connector.
[* black] Carefully plug the USB connector to the logic board and your computer.
[* black] Apply electrical power on the hard drive
.
[* icon_note] Be careful, this temporary repair is very fragile. Do not apply any tension on the USB connector or with the USB cable.
[* icon_caution] Before to continue, you should ensure one more time that the connectors are well in place to prevent from any short circuit. I recommend to:
[*
black] Insert wisdom hereFirst, plug and apply the electrical power on the logic board only do not plug the hard drive or even the USB connector. Wait for a minute if everything goes well!
[* black] You should use a hold computer if any available to you. Your computer should be protected from a short circuit here but we never know. Please don't use your brand new computer!
[* black] When you are ready to go:
[* black] Plug the hard drive with the USB/SATA bridge throug the SATA connector.
[* black] Carefully plug the USB connector to the logic board and your computer.
[* black] Apply electrical power on the hard drive
.