Modifications apportées à l'étape #3
Modifié par Sam Omiotek —
Modification approuvée par Sam Omiotek
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Disconnect the ignitor from the main PCB assembly | |
| - | [* black] Use your fingers or a pair of pliers to disconnect the red wiring harness labeled "IG" on the main PCB assembly. |
| + | [* black] Use a pair of needle nose pliers to depress the locking tab on the red wiring harness's connector labeled ***IG*** on the main PCB assembly. |
| + | [* black] With the locking tab depressed, pull to remove the red wire from its header on the PCB. |