Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #4

Modifié par Shawn Menard —

Modification approuvée par Corbanizer

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_reminder] Verify there is no voltage to the fixture using the non-contact voltage tester according to the device instructions.
-[* red] Twist off the wire nut from the hot side (black or red wire) and the neutral side (white wire).
- [* icon_caution] Do not untwist the wires. Only the wire nut should be untwisted
+[* icon_caution] ***Shock Hazard***. Check the fixture for voltage using the non-contact voltage reader according to the device’s instructions.
+[* icon_caution] ***Shock Hazard***. After removing wire nuts, do not touch the bare wires the wire nuts were covering.
+[* black] Remove wire nut by twisting wire nut counterclockwise from the hot side (black or red wire) and the neutral side (white wire). Do not untwist wires.