Modifications apportées à l'étape #3
Lignes de l'étape
| [* red] Using the Phillips #1 or Phillips #00 screwdriver, remove the two 3-mm screws from the card with black and white wires coming off of it. | |
| [* icon_note] Our card has one screw that required a Philips #1 and one that required a Philips #00. Start with the Philips #1 and, if it doesn't fit, use the Philips #00. | |
| - | [* icon_note] These are not captive screws and once loosened will be free to move about the assembly. Care should be take to not allow either fastener into the CPU fan and duct (located upper left). |
| + | [* icon_note] These are not captive panel screws and once loosened will be free to move about the assembly. Care should be take to not allow either fastener into the CPU fan and duct (located upper left). |
| [* black] The card should pop up. Gently remove the card with your fingers. |