Modifications apportées à l'étape #9
Modifié par Inah Embile —
Modification approuvée par Inah Embile
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Using a Phillips #00 screwdriver, remove the two 3-mm screws from the card connected by a single black wire. |
|---|---|
| - | [* icon_note] These are not captive screws and once loosened will be free to move about the assembly. Care should be take to not allow either fastener into the CPU fan and duct (located upper left). |
| + | [* red] Use a Phillips #00 screwdriver to remove the two 3-mm screws from the card connected to a black wire. |
| + | [* icon_reminder] These are not captive screws and, once loosened, will be free to move about the assembly. |
| + | [* icon_caution] Be careful not to allow either fastener into the CPU fan and duct (located in the upper left). |