Modifications apportées à l'étape #8
Modifié par Inah Embile —
Modification approuvée par Inah Embile
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Use a Phillips #1 screwdriver to remove the 6-mm screw near the hard drive. | |
| - | [* icon_ |
| + | [* icon_note] This is not a captive screw and, once loosened, will be free to move about the assembly. |
| [* icon_caution] Be careful not to allow either fastener into the CPU fan and duct (located in the upper left). |