Modifications apportées à l'étape #8
Modifié par Jeanette Lopez —
Modification approuvée par Jeanette Lopez
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Use a Phillips #1 screwdriver to remove the 6-mm screw near the hard drive. |
|---|---|
| + | [* icon_caution] Be careful not to allow any hardware into the CPU fan and duct which are located in the upper left. |
| + | [* red] Rremove the 6-mm screw near the hard drive using a Phillips #1 screwdriver. |
| [* icon_note] This is not a captive screw and, once loosened, will be free to move about the assembly. | |
| - | [* icon_caution] Be careful not to allow either fastener into the CPU fan and duct (located in the upper left). |