Aller au contenu principal

Modifications apportées à l'étape #11

Modifié par Grizz

Modification approuvée par Jake Devincenzi

Avant
Après
Inchangé

Lignes de l'étape

[* black] Removing the Voltage Regulator Module.
[* black] This board is called the DC/DC board or the Voltage Regulator Module. It takes the power from the power brick and regulates the power to different components of the Cube.
-[* red] First disconnect this connector, this provides power to the hard drive
+[* red] First disconnect this connector, this provides power to the hard drive.
+[* black] Then release the white clip on the connector socket, which is accessed from the side of the core.
[* black] with a little persuesion, the board comes out of it's socket(it's hard to show how the board comes out, but in person, it's pretty self explanitory)