Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Carsten Frauenheim

Modification approuvée par Carsten Frauenheim

Avant
Après
Inchangé

Lignes de l'étape

+[* black] Grab the adhesive strip's pull tab and slowly pull the adhesive strip out from underneath the speaker.
+ [* icon_note] Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.
+[* black] Pull the adhesive strip until it's freed from under the speaker.
+[* icon_note] If the adhesive strip breaks, use a [guide|25705|heated iOpener|new_window=true], a heat gun, or a hair dryer to help remove the adhesive:
+ [* black] Apply heat to the speaker to soften the adhesive underneath.
+ [* black] Carefully slide a spudger or opening pick underneath the speaker to separate the adhesive.

Image 1

Aucune image précédente

Ajouté

Image 2

Aucune image précédente

Ajouté