Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #2

Modifié par Sarah Westberg —

Modification approuvée par Sarah Westberg

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Using your Phillip screwdriver, remove the two screws which are attached at the bottom of the front grille.
+[* black] Using your Phillips #0 screwdriver, remove the two screws which are attached at the bottom of the front grille.
[* black] Lift the front grille up and off the front of the frame, carefully set it in front of the dehumidifier.
-[* icon_note] This will avoid damaging the control board wire harness which is still attached to the back of the front grille.
+[* icon_caution] The control board wire harness is still attached to the back of the front grille.