Modifications apportées à l'étape #9
Modifié par Gina Kittleson —
Modification approuvée par Gina Kittleson
- Avant
- Après
- Inchangé
Lignes de l'étape
| [title] Feed Wires Through the Battery Box | |
| - | [* red] Feed two power rated wires through the lower hole. |
| - | [* orange] Feed the |
| + | [* red] Feed two power rated wires through the lower hole unconnected to any previously referred to wires. |
| + | [* orange] Feed the female end of the battery amphenol connector through the upper hole. |
| [* yellow] Add male crimp connectors to all inner wire ends. | |
| [* green] Plug in the purple battery wires to the switch | |
| [* violet] Plug in the amphenol battery wires to the switch. | |
| [* blue] Add male crimps to both sides of two wires and use a fuse on the power wire. | |
| [* light_blue] Plug one side of the doubly male crimped wires into the switch | |
| [* icon_caution] Plug all of the power wires into the right side of the switch and the ground into the left side. |